Just the ticket!
The different kinds of turned screws we produce can be manufactured with standard metric or American / English threads, with fine-pitch threads or various thread pitches.
- Adjustable elements
- Adjusting elements
- Adjusting screws
- Capstan-headed screws
- Centring screws
- Cheese-head screws
- Closing screws
- Collar screws
- Cone screws
- Countersunk screws
- Coupling screws
- Cross slides
- Differential screws
- Double thread pins
- Eccentric bolts
- Eccentric pins
- Eccentric screws
- Eyebolts
- Fillister head screws
- Fitted screws
- Fitting screws
- Fixing pins
- Flat-head screws
- Gripper screws
- Hexagon socket head screws
- Hollow screws
- Locking screws
- Pressure pins
- Radial screws
- Round head screws
- Shoulder screws
- Solder screws
- Specialist screws
- Special-purpose screws
- Step screws
- Stop screws
- Stud screws
- Support screws
- Tapered fitted screws
- Tapered screws
- Tapered threaded pins
- Tensioning wedges
- Tension screws
- Threaded pins
- Threaded sleeves
- Threaded sockets
- Torx® screws
- Torx Plus® screws
- Qual. 10.9 / 12.9 / 14.9
- Heat and surface treatment
- Thread-locking systems
- Hex-socket and Torx®/Torx Plus®
- Wear protection
- Laser marking
- Specialist screws and fixing elements based on customer drawing
- Machining diameter: – 65 mm
Torx® and Torx plus®
Rumpel holds a licence to manufacture both of these copyright-protected drive systems. These drives are capable of delivering high levels of torque without damaging the screw head. They reduce assembly times, increase productivity and improve performance on assembly lines.
You receive additional informations at Camcar Innovations.
High level of torque transmission, very good power transmission by the screwing tool, easier screwdriving and no contact pressure necessary.
Higher torque transmission in comparison with Torx®, the screwing tool cannot slip and radial forces are avoided thanks to the wide application of force.
